A professional manufacturing, trading and agency company with 16 years of experience in SMT machines

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series 1

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series 2

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series 3

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series 4

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series 5

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series

“Original Yamaha KLJ-MC600-002 44mm Motorized Feeder”
✅ Customized for ZSR SMT machine: 100% original factory protocol direct connection, eliminating compatibility risk, hot-swappable material change in seconds.
✅ Synonymous with accuracy and reliability: ±0.1mm ultra-precise feeding + aviation aluminum anti-shaking structure, throw rate ≤0.02%, 80% lower loss than third-party accessories.
✅ Instant 30%+ increase in productivity: self-diagnostic failure warning + 20,000 hours maintenance-free design, saving $12,000 in annual component loss & $3,500 in maintenance costs.
⚠️ A must for engineers: non-genuine parts can void equipment warranty!
🔥 Immediately match your ZSR equipment to unlock 100% of its capacity potential - $2.3 in long-term revenue for every $1 invested!

Translated with DeepL.com (free version)

Inquiry

Write a Review

Product Introduction

Genuine Yamaha KLJ-MC600-002 44mm SMT Feeder designed for Yamaha ZSR series mounters!

As a genuine Yamaha spare part, the KLJ-MC600-002 is a high performance 44mm motorized SMT feeder. It has been developed to match the demanding requirements of the Yamaha ZSR series of high-speed mounters, ensuring accurate, stable and efficient component feeding on your SMT production line. punt

Product Display

1744511728312-1

微信图片_20250411173538

1 (3) (10)

微信图片_20250411173421

微信图片_20240420115546

微信图片_20240420115639

微信图片_20250410161642 (2)

微信图片_20250520180309

微信图片_20250303101209 (2)

微信图片_20250303101121

微信图片_20250520180313

微信图片_20241230105224

Product Advantages

Yamaha Genuine Klj-mc600-002 Feeder | 44Mm Smt Feeder Compatible With Zsr Series 20

Ultra-high Speed Performance The feeding speed can reach up to 800mm/s, which is compatible with the ultra-fast mode of Yamaha chip mounters, increasing the production capacity by over 30%. The intelligent tension adjustment technology ensures that miniature components such as ICs, resistors, and capacitors are fed without deviation.

Extreme Durability The main body is made of aviation aluminum material, combined with an anti-static ceramic ratchet, boasting a lifespan of over 5 million cycles (twice the industry average). With an IP65 dustproof and splash-proof design, it is suitable for dust-free workshops and high-humidity environments.

Precise Compatibility It natively supports Yamaha series chip mounters, allowing for plug-and-play operation without debugging. The customizable tape guides can accommodate components that conform to JEDEC standards as well as non - standard and irregularly shaped components.

Cost Optimization Solution With a modular design, key components such as feeding gears and sensors support quick replacement, reducing maintenance costs by 60%. It provides a 1-year warranty and a global 48-hour spare parts response service.

Application Scenario

Consumer electronics

Smartphone motherboards, TWS earphone circuit boards, smartwatch modules

Automotive electronics

ECU control board, vehicle-mounted sensors, charging modules for new energy vehicles

LED display

Mini LED backlight module, outdoor display screen unit

Medical electronics

PCBs for medical imaging equipment, implantable sensors

FAQ

What is the typical lifespan of an SMT Feeder? How to extend its service life?

Standard lifespan: The average lifespan of an industrial-grade SMT Feeder is 3 to 5 million cycles. For example, the Yamaha CL series can reach up to 8 million cycles.

How to fix communication errors between SMT Feeder and pick-and-place machine?

Confirm that the PIN pins of the Feeder interface are not bent or oxidized. Check whether the Feeder firmware version supports the model of the chip mounter. Restart the control unit of the chip mounter and reload the parameter configuration file of the Feeder.

Can third-party SMT Feeders match OEM performance?

Third-party Feeders have an advantage in terms of short-term costs, but there are significant differences. For high-precision and large-batch production, it is preferable to choose the original factory feeders. For trial production or scenarios with low complexity, it is possible to try high-quality third-party brands.

How to quickly replace worn parts like feeder gears?

Cut off the power supply and remove the tape. Use a 3mm hexagonal wrench to remove the gear cover plate (pay attention to the spring tension). Take out the old gear set and compare the pitch consistency with that of the new gear. Apply thermal conductive silicone grease and then install the new gear. Use a calibration jig to test the feeding tension (target value: 2.5N±0.3N).

Can you customize SMT Feeders for non-standard tape widths?

YES

Get in touch with us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!