A professional manufacturing, trading and agency company with 16 years of experience in SMT machines

Used MIRAE EX-Series 8-56MM Electric Feeder for SMT Pick and Place | High-Precision Component Feeding | 8-56mm Compatibility | Refurbished SMT Equipment 1

Used MIRAE EX-Series 8-56MM Electric Feeder for SMT Pick and Place | High-Precision Component Feeding | 8-56mm Compatibility | Refurbished SMT Equipment

The MIRAE EX series electric feeders adopt closed-loop servo control technology to ensure the feeding step pitch accuracy of ±0.03mm. They are compatible with special-shaped components and high-speed surface mounting. Equipped with a material shortage warning system and a modular quick-release structure, the maintenance efficiency is increased by 50%. They support the rapid deployment of second-hand equipment into production, reducing the procurement costs of enterprises. These feeders are suitable for the flexible SMT manufacturing requirements of small and medium batches with multiple varieties.

Inquiry

Write a Review

Product Introduction

The Yamaha CL/FS/FT Series SMT Feeders are a series of original high-precision feeders specifically designed for Yamaha chip mounters. It covers three major models: CL (compact type), FS (high-speed type), and FT (flexible compatible type), and is suitable for tape widths ranging from 8mm to 88mm. Using military-grade materials and intelligent closed-loop control technology, it provides zero-error feeding and 99.9% operational stability for PCB assembly in fields such as consumer electronics, industrial equipment, and 5G communication, helping customers achieve continuous and efficient 24/7 production.

Product Display

20210813_102729_021

1 (82)

0 (52)

00 (3)

20210813_102729_023

0 (51)

20210816_094219_001

0 (50)

0 (2) (2)

O1CN01lwnZsY1fdKPkypqyR_!!1011684029-0-cib

20210813_100912_002 (2)

20210813_100912_000 (2)

20210813_100912_006

8994207796_215410768

20210813_100912_004 (2)

Product Advantages

Sell Mirae Future Electric Feeder Type C feeders. Available in 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, and 56mm. A large quantity of original and second-hand ones are suitable for Mx200p, mx200L, mx400, mx400l, mx400lp, etc.

After undergoing factory-level detection and calibration, the equipment has been restored to its original factory precision (±0.03mm). Worn components in key parts have been replaced to ensure the same level of stability as that of brand-new equipment. It supports high-speed placement (0.1s per piece), and the reject rate is ≤0.15%.

It is suitable for components within the range of 8-56mm, supports irregular-shaped components and soft packaging tape. It is equipped with an intelligent tension adjustment system, is compatible with all MIRAE placement machines and third-party devices, and can seamlessly meet the production switching requirements of multiple product varieties.

The modular quick-release structure design reduces the maintenance time by 50%; with the functions of real-time material shortage alarm and lifespan early warning, the average annual downtime due to failures is reduced by 70%. The second-hand price is only 30% of that of a new machine, and the investment payback period is shortened by 60%.

Application Scenario

Consumer electronics

Smartphone motherboards, TWS earphone circuit boards, smartwatch modules

Automotive electronics

ECU control board, vehicle-mounted sensors, charging modules for new energy vehicles

LED display

Mini LED backlight module, outdoor display screen unit

Medical electronics

PCBs for medical imaging equipment, implantable sensors

FAQ

What is the typical lifespan of an SMT Feeder? How to extend its service life?

Standard lifespan: The average lifespan of an industrial-grade SMT Feeder is 3 to 5 million cycles. For example, the Yamaha CL series can reach up to 8 million cycles.

How to fix communication errors between SMT Feeder and pick-and-place machine?

Confirm that the PIN pins of the Feeder interface are not bent or oxidized. Check whether the Feeder firmware version supports the model of the chip mounter. Restart the control unit of the chip mounter and reload the parameter configuration file of the Feeder.

Can third-party SMT Feeders match OEM performance?

Third-party Feeders have an advantage in terms of short-term costs, but there are significant differences. For high-precision and large-batch production, it is preferable to choose the original factory feeders. For trial production or scenarios with low complexity, it is possible to try high-quality third-party brands.

How to quickly replace worn parts like feeder gears?

Cut off the power supply and remove the tape. Use a 3mm hexagonal wrench to remove the gear cover plate (pay attention to the spring tension). Take out the old gear set and compare the pitch consistency with that of the new gear. Apply thermal conductive silicone grease and then install the new gear. Use a calibration jig to test the feeding tension (target value: 2.5N±0.3N).

Can you customize SMT Feeders for non-standard tape widths?

YES

Get in touch with us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!