A professional manufacturing, trading and agency company with 16 years of experience in SMT machines

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines 1

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines 2

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines 3

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines 4

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines 5

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines

The Samsung SME Series 32mm SMT Feeder is a robust and precisely engineered solution tailored for the high-efficiency feeding of large-size SMD components in modern surface-mount production environments. Designed to accommodate 32mm-wide carrier tapes, this feeder is ideal for delivering components such as large ICs, power modules, connectors, and relays with high placement accuracy.

Optimized for Samsung CP series pick-and-place machines, the SME 32mm feeder integrates a mechanically calibrated indexing system that ensures consistent tape advancement and precise component alignment, even at high operating speeds. This results in reduced misfeeds and improved placement yields across demanding SMT lines.

Constructed from high-strength aluminum alloy and reinforced engineering plastics, the feeder is built to endure continuous operation while minimizing wear and the need for frequent maintenance. Its modular design allows for quick, tool-free installation and removal, facilitating rapid line changeovers and enhancing overall productivity.

Inquiry

Write a Review

Product Introduction

The Samsung SME Series 32mm SMT Feeder is a high-performance tape feeder specifically engineered to handle 32mm-wide carrier tapes, ideal for feeding larger SMD components such as connectors, relays, power ICs, and modules. Compatible with Samsung CP series pick-and-place machines, this feeder ensures reliable, accurate component delivery even in high-speed, high-volume production environments.

Product Display

RIMG1006

RIMG1004

RIMG1001

微信图片_20250214090848

微信图片_20250214090824

微信图片_20250117094231 (2)

微信图片_20250117094226

微信图片_20250117094219

微信图片_20250117094214

Product Advantages

Samsung SME Series 32mm SMT Electric Feeder – High-Volume Component Feeder for CP Pick-and-Place Machines 17

Ultra-high Speed Performance The feeding speed can reach up to 800mm/s, which is compatible with the ultra-fast mode of Yamaha chip mounters, increasing the production capacity by over 30%. The intelligent tension adjustment technology ensures that miniature components such as ICs, resistors, and capacitors are fed without deviation.

Extreme Durability The main body is made of aviation aluminum material, combined with an anti-static ceramic ratchet, boasting a lifespan of over 5 million cycles (twice the industry average). With an IP65 dustproof and splash-proof design, it is suitable for dust-free workshops and high-humidity environments.

Precise Compatibility It natively supports Yamaha series chip mounters, allowing for plug-and-play operation without debugging. The customizable tape guides can accommodate components that conform to JEDEC standards as well as non - standard and irregularly shaped components.

Cost Optimization Solution With a modular design, key components such as feeding gears and sensors support quick replacement, reducing maintenance costs by 60%. It provides a 1-year warranty and a global 48-hour spare parts response service.

Application Scenario

Consumer electronics

Smartphone motherboards, TWS earphone circuit boards, smartwatch modules

Automotive electronics

ECU control board, vehicle-mounted sensors, charging modules for new energy vehicles

LED display

Mini LED backlight module, outdoor display screen unit

Medical electronics

PCBs for medical imaging equipment, implantable sensors

FAQ

What is the typical lifespan of an SMT Feeder? How to extend its service life?

Standard lifespan: The average lifespan of an industrial-grade SMT Feeder is 3 to 5 million cycles. For example, the Yamaha CL series can reach up to 8 million cycles.

How to fix communication errors between SMT Feeder and pick-and-place machine?

Confirm that the PIN pins of the Feeder interface are not bent or oxidized. Check whether the Feeder firmware version supports the model of the chip mounter. Restart the control unit of the chip mounter and reload the parameter configuration file of the Feeder.

Can third-party SMT Feeders match OEM performance?

Third-party Feeders have an advantage in terms of short-term costs, but there are significant differences. For high-precision and large-batch production, it is preferable to choose the original factory feeders. For trial production or scenarios with low complexity, it is possible to try high-quality third-party brands.

How to quickly replace worn parts like feeder gears?

Cut off the power supply and remove the tape. Use a 3mm hexagonal wrench to remove the gear cover plate (pay attention to the spring tension). Take out the old gear set and compare the pitch consistency with that of the new gear. Apply thermal conductive silicone grease and then install the new gear. Use a calibration jig to test the feeding tension (target value: 2.5N±0.3N).

Can you customize SMT Feeders for non-standard tape widths?

YES

Get in touch with us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!