A professional manufacturing, trading and agency company with 16 years of experience in SMT machines

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing 1

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing 2

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing 3

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing 4

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing 5

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing

The Hanwha Samsung SM481 PLUS redefines high-speed precision with 40,000 components per hour (CPH) placement capability and 0.025mm ultra-fine accuracy. Engineered for high-mix, high-volume production, this advanced SMT system delivers unmatched flexibility for LED displays, automotive electronics, and 5G communication modules.

Inquiry

Write a Review

Product Introduction

The SM481 PLUS is a new generation of ultra-high-speed and high-precision pick-and-place machine from Hanwha Samsung. It is specifically designed to meet the needs of large-volume and multi-variety electronics manufacturing, offering an astonishing placement speed of 85,000 CPH and ultimate precision of ±0.025mm. It is an ideal choice for the manufacturing of automotive electronics, high-end LEDs, and 5G communication devices.

Product Display

三星SM481PUSE (3)

三星SM481PUSE (4)

三星SM481PUSE (2)

Product Advantages

High-Performance Hanwha Samsung SM481PLUS Pick and Place Machine | Reliable SMT Equipment for Efficient Manufacturing 11

Placement speed: It can reach up to 40,000 CPH at most (under the optimal conditions).

Number of placement shafts: 10 shafts, including 1 cantilever.

Component recognition method: It uses flying cameras and fixed cameras (optional).

Applicable component range: Components ranging from 01005 to 42mm (height: 15mm).

Technical Specifications

Item	Parameter
Placement Speed	40,000 CPH
Placement Accuracy	±0.025mm
Component Range	01005至42mm（H 15mm
Substrate Size	Maximum 510mm × 460mm
Feeder Capacity	Up to 120 (8mm tape feeders)
Power Supply Requirement	AC200/208/220/240/380/415V

Application Scenario

Consumer electronics

Smartphone motherboards, TWS earphone circuit boards, smartwatch modules

Automotive electronics

ECU control board, vehicle-mounted sensors, charging modules for new energy vehicles

LED display

Mini LED backlight module, outdoor display screen unit

Medical electronics

PCBs for medical imaging equipment, implantable sensors

FAQ

1.What is a pick and place machine used for?

A SMT Pick and Place Machine is used to automatically and precisely mount electronic components (such as resistors, capacitors, and chips) onto PCB circuit boards. It is the core equipment in an SMT (Surface Mount Technology) production line.

What are the main brands of pick and place machines?

A: The mainstream brands include: High - end: Yamaha, Panasonic, FUJI Cost - effective: JUKI, Samsung Pick and Place Machine Domestic (Chinese): Dongguan GKG, Shenzhen Luyuan

How is the mounting speed of a pick and place machine measured?

It is measured in CPH (Components Per Hour). For example: Low - speed machines: 3,000 - 10,000 CPH (for small - batch production) Medium - speed machines: 10,000 - 30,000 CPH (such as the Yamaha YG100) High - speed machines: 30,000 - 60,000+ CPH (such as the YG200L) High-resolution CL cameras 0.3mm fine-pitch nozzles Note: Older units may need upgrades.

What is the smallest component a pick and place machine can mount?

It depends on the precision (unit: mm/μm): Regular precision: ±0.05mm (for mounting 0402 and 0603 components) High precision: ±0.025mm (for mounting 01005 and 0201 miniature components) , 500 ) 🔧 � � � � � � � � � � � � � � � � � � � ( � � � � : 1,500)🔧Feederrecalibration(cost:200/unit) 🔧 Lubricate linear guides (DIY possible)

Is it worth buying a second - hand pick and place machine?

It is suitable for enterprises with limited budgets, but the following points should be noted: Advantages: Low price (30% - 50% of a new machine) and quick return on investment. Risks: Need to check for wear (rails, mounting heads), software compatibility, and after - sales service. YSU (Yamaha Software Unit) version Feeder/head calibration licenses Tip: Request a demo run before payment.

Get in touch with us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!